群晖使用mediawiki套件
不是容器 内网能访问 公网不能
已有公网IP 可以通过5000端口公网访问
但是IP后面跟 /mediawiki 显示超时
配置文件如下是不是哪里有问题。。
<?php
# This file was automatically generated by the MediaWiki 1.35.5
# installer. If you make manual changes, please keep track in case you
# need to recreate them later.
#
# See includes/DefaultSettings.php for all configurable settings
# and their default values, but don't forget to make changes in _this_
# file, not there.
#
# Further documentation for configuration settings may be found at:
# https://www.mediawiki.org/wiki/Manual:Configuration_settings
# Protect against web entry
if ( !defined( 'MEDIAWIKI' ) ) {
exit;
}
## Uncomment this to disable output compression
# $wgDisableOutputCompression = true;
$wgSitename = "*******";
## The URL base path to the directory containing the wiki;
## defaults for all runtime URL paths are based off of this.
## For more information on customizing the URLs
## (like /w/index.php/Page_title to /wiki/Page_title) please see:
## https://www.mediawiki.org/wiki/Manual:Short_URL
$wgScriptPath = "/mediawiki";
## The protocol and server name to use in fully-qualified URLs
$wgServer = "http://**************"; ///此处写的静态IP地址
## The URL path to static resources (images, scripts, etc.)
$wgResourceBasePath = $wgScriptPath;
## The URL paths to the logo. Make sure you change this from the default,
## or else you'll overwrite your logo when you upgrade!
$wgLogos = [ '1x' => "$wgResourceBasePath/resources/assets/wiki.png" ];
## UPO means: this is also a user preference option
$wgEnableEmail = true;
$wgEnableUserEmail = true; # UPO
$wgEmergencyContact = "apache@🌻.invalid";
$wgPasswordSender = "apache@🌻.invalid";
$wgEnotifUserTalk = false; # UPO
$wgEnotifWatchlist = false; # UPO
$wgEmailAuthentication = true;
## Database settings
$wgDBtype = "mysql";
$wgDBserver = "localhost:/run/mysqld/mysqld10.sock";
$wgDBname = "mediawiki";
$wgDBuser = "mediawiki";
$wgDBpassword = "Shanchao1@#";
# MySQL specific settings
$wgDBprefix = "";
# MySQL table options to use during installation or update
$wgDBTableOptions = "ENGINE=InnoDB, DEFAULT CHARSET=binary";
# Shared database table
# This has no effect unless $wgSharedDB is also set.
$wgSharedTables[] = "actor";
## Shared memory settings
$wgMainCacheType = CACHE_ACCEL;
$wgMemCachedServers = [];
## To enable image uploads, make sure the 'images' directory
## is writable, then set this to true:
$wgEnableUploads = false;
#$wgUseImageMagick = true;
#$wgImageMagickConvertCommand = "/usr/bin/convert";
# InstantCommons allows wiki to use images from https://commons.wikimedia.org
$wgUseInstantCommons = false;
# Periodically send a pingback to https://www.mediawiki.org/ with basic data
# about this MediaWiki instance. The Wikimedia Foundation shares this data
# with MediaWiki developers to help guide future development efforts.
$wgPingback = true;
## If you use ImageMagick (or any other shell command) on a
## Linux server, this will need to be set to the name of an
## available UTF-8 locale. This should ideally be set to an English
## language locale so that the behaviour of C library functions will
## be consistent with typical installations. Use $wgLanguageCode to
## localise the wiki.
#$wgShellLocale = "en_US.utf8";
## Set $wgCacheDirectory to a writable directory on the web server
## to make your wiki go slightly faster. The directory should not
## be publicly accessible from the web.
$wgCacheDirectory = "$IP/cache";
# Site language code, should be one of the list in ./languages/data/Names.php
$wgLanguageCode = "zh-cn";
$wgSecretKey = "**************************************************";
# Changing this will log out all existing sessions.
$wgAuthenticationTokenVersion = "1";
# Site upgrade key. Must be set to a string (default provided) to turn on the
# web installer while LocalSettings.php is in place
$wgUpgradeKey = "*****************************";
## For attaching licensing metadata to pages, and displaying an
## appropriate copyright notice / icon. GNU Free Documentation
## License and Creative Commons licenses are supported so far.
$wgRightsPage = ""; # Set to the title of a wiki page that describes your license/copyright
$wgRightsUrl = "";
$wgRightsText = "";
$wgRightsIcon = "";
# Path to the GNU diff3 utility. Used for conflict resolution.
$wgDiff3 = "";
# The following permissions were set based on your choice in the installer
$wgGroupPermissions['*']['read'] = false;
# 下面一行不是必须的，因为它已被设置与默认值中。对于'*'设置的禁止权限不会影响到设置为启用权限的用户组。
$wgGroupPermissions['user']['read'] = true;
# 限制非注册用户不可读，设定匿名用户（未登录）可以看到的页面
$wgWhitelistRead = array ("首页", "Special:Userlogin", "Wikipedia:Help");
# 禁止匿名用户编辑
#$wgGroupPermissions = array();
$wgGroupPermissions['*']['createaccount'] = false;
$wgGroupPermissions['*']['read'] = false;
$wgGroupPermissions['*']['edit'] = false;
# 禁止新用户注册
#Prevent new user registrations
$wgWhitelistAccount = array ( "user" => 0, "sysop" => 1, "developer" => 1 );
## Default skin: you can change the default skin. Use the internal symbolic
## names, ie 'vector', 'monobook':
$wgDefaultSkin = "vector";
# Enabled skins.
# The following skins were automatically enabled:
wfLoadSkin( 'MonoBook' );
wfLoadSkin( 'Timeless' );
wfLoadSkin( 'Vector' );
wfLoadExtension( 'VisualEditor' );
# End of automatically generated settings.
# Add more configuration options below.
不是容器 内网能访问 公网不能
已有公网IP 可以通过5000端口公网访问
但是IP后面跟 /mediawiki 显示超时
配置文件如下是不是哪里有问题。。
<?php
# This file was automatically generated by the MediaWiki 1.35.5
# installer. If you make manual changes, please keep track in case you
# need to recreate them later.
#
# See includes/DefaultSettings.php for all configurable settings
# and their default values, but don't forget to make changes in _this_
# file, not there.
#
# Further documentation for configuration settings may be found at:
# https://www.mediawiki.org/wiki/Manual:Configuration_settings
# Protect against web entry
if ( !defined( 'MEDIAWIKI' ) ) {
exit;
}
## Uncomment this to disable output compression
# $wgDisableOutputCompression = true;
$wgSitename = "*******";
## The URL base path to the directory containing the wiki;
## defaults for all runtime URL paths are based off of this.
## For more information on customizing the URLs
## (like /w/index.php/Page_title to /wiki/Page_title) please see:
## https://www.mediawiki.org/wiki/Manual:Short_URL
$wgScriptPath = "/mediawiki";
## The protocol and server name to use in fully-qualified URLs
$wgServer = "http://**************"; ///此处写的静态IP地址
## The URL path to static resources (images, scripts, etc.)
$wgResourceBasePath = $wgScriptPath;
## The URL paths to the logo. Make sure you change this from the default,
## or else you'll overwrite your logo when you upgrade!
$wgLogos = [ '1x' => "$wgResourceBasePath/resources/assets/wiki.png" ];
## UPO means: this is also a user preference option
$wgEnableEmail = true;
$wgEnableUserEmail = true; # UPO
$wgEmergencyContact = "apache@🌻.invalid";
$wgPasswordSender = "apache@🌻.invalid";
$wgEnotifUserTalk = false; # UPO
$wgEnotifWatchlist = false; # UPO
$wgEmailAuthentication = true;
## Database settings
$wgDBtype = "mysql";
$wgDBserver = "localhost:/run/mysqld/mysqld10.sock";
$wgDBname = "mediawiki";
$wgDBuser = "mediawiki";
$wgDBpassword = "Shanchao1@#";
# MySQL specific settings
$wgDBprefix = "";
# MySQL table options to use during installation or update
$wgDBTableOptions = "ENGINE=InnoDB, DEFAULT CHARSET=binary";
# Shared database table
# This has no effect unless $wgSharedDB is also set.
$wgSharedTables[] = "actor";
## Shared memory settings
$wgMainCacheType = CACHE_ACCEL;
$wgMemCachedServers = [];
## To enable image uploads, make sure the 'images' directory
## is writable, then set this to true:
$wgEnableUploads = false;
#$wgUseImageMagick = true;
#$wgImageMagickConvertCommand = "/usr/bin/convert";
# InstantCommons allows wiki to use images from https://commons.wikimedia.org
$wgUseInstantCommons = false;
# Periodically send a pingback to https://www.mediawiki.org/ with basic data
# about this MediaWiki instance. The Wikimedia Foundation shares this data
# with MediaWiki developers to help guide future development efforts.
$wgPingback = true;
## If you use ImageMagick (or any other shell command) on a
## Linux server, this will need to be set to the name of an
## available UTF-8 locale. This should ideally be set to an English
## language locale so that the behaviour of C library functions will
## be consistent with typical installations. Use $wgLanguageCode to
## localise the wiki.
#$wgShellLocale = "en_US.utf8";
## Set $wgCacheDirectory to a writable directory on the web server
## to make your wiki go slightly faster. The directory should not
## be publicly accessible from the web.
$wgCacheDirectory = "$IP/cache";
# Site language code, should be one of the list in ./languages/data/Names.php
$wgLanguageCode = "zh-cn";
$wgSecretKey = "**************************************************";
# Changing this will log out all existing sessions.
$wgAuthenticationTokenVersion = "1";
# Site upgrade key. Must be set to a string (default provided) to turn on the
# web installer while LocalSettings.php is in place
$wgUpgradeKey = "*****************************";
## For attaching licensing metadata to pages, and displaying an
## appropriate copyright notice / icon. GNU Free Documentation
## License and Creative Commons licenses are supported so far.
$wgRightsPage = ""; # Set to the title of a wiki page that describes your license/copyright
$wgRightsUrl = "";
$wgRightsText = "";
$wgRightsIcon = "";
# Path to the GNU diff3 utility. Used for conflict resolution.
$wgDiff3 = "";
# The following permissions were set based on your choice in the installer
$wgGroupPermissions['*']['read'] = false;
# 下面一行不是必须的，因为它已被设置与默认值中。对于'*'设置的禁止权限不会影响到设置为启用权限的用户组。
$wgGroupPermissions['user']['read'] = true;
# 限制非注册用户不可读，设定匿名用户（未登录）可以看到的页面
$wgWhitelistRead = array ("首页", "Special:Userlogin", "Wikipedia:Help");
# 禁止匿名用户编辑
#$wgGroupPermissions = array();
$wgGroupPermissions['*']['createaccount'] = false;
$wgGroupPermissions['*']['read'] = false;
$wgGroupPermissions['*']['edit'] = false;
# 禁止新用户注册
#Prevent new user registrations
$wgWhitelistAccount = array ( "user" => 0, "sysop" => 1, "developer" => 1 );
## Default skin: you can change the default skin. Use the internal symbolic
## names, ie 'vector', 'monobook':
$wgDefaultSkin = "vector";
# Enabled skins.
# The following skins were automatically enabled:
wfLoadSkin( 'MonoBook' );
wfLoadSkin( 'Timeless' );
wfLoadSkin( 'Vector' );
wfLoadExtension( 'VisualEditor' );
# End of automatically generated settings.
# Add more configuration options below.
