AP和电脑通过网线直连，AP按住mode键上电，终端显示AP是 10.0.0.01，把电脑网卡设置为 10.0.0.2/255.0.0.0 DNS留空没填。
电脑ping不通AP，不知道为什么。
以下是终端显示内容：
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP: Numonyx Mirrorbit (0089)
Xmodem file system is available.
flashfs[0]: 36 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 11496960
flashfs[0]: Bytes available: 20500992
flashfs[0]: flashfs fsck took 15 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: a4:4c:11:ca:fd:6c
Ethernet speed is 100 Mb - FULL Duplex
Mode button pressed.
Mode button held for at least 20 seconds.
process_config_recovery: set IP address and config to default 10.0.0.1
process_config_recovery: image recovery
image_recovery: Download default IOS tar image tftp://255.255.255.255/ap3g2-k9w7
-tar.default
examining image...
DPAA Set for Independent Mode
DPAA_INIT = 0x0
%Error opening tftp://255.255.255.255/ap3g2-k9w7-tar.default (connection timed o
ut)ap:
电脑ping不通AP，不知道为什么。
以下是终端显示内容：
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP: Numonyx Mirrorbit (0089)
Xmodem file system is available.
flashfs[0]: 36 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 11496960
flashfs[0]: Bytes available: 20500992
flashfs[0]: flashfs fsck took 15 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: a4:4c:11:ca:fd:6c
Ethernet speed is 100 Mb - FULL Duplex
Mode button pressed.
Mode button held for at least 20 seconds.
process_config_recovery: set IP address and config to default 10.0.0.1
process_config_recovery: image recovery
image_recovery: Download default IOS tar image tftp://255.255.255.255/ap3g2-k9w7
-tar.default
examining image...
DPAA Set for Independent Mode
DPAA_INIT = 0x0
%Error opening tftp://255.255.255.255/ap3g2-k9w7-tar.default (connection timed o
ut)ap:
